USB Device Not Recognized
I used to be able to synch my 7780 via USB, but after some combination of configuration changes (including a repair to a WinXP OS install), every attempt now results in a "USB Device Not Recognized" error.
My initial thought was that it was some kind of driver problem, but it seems not so much a driver issue as a hardware ID problem. The setup log (included below) shows that the device is not being recognized as USB\VID_0fca&PID_0001 (what the RimUsb driver is looking for) but rather as USB\VID_0000&PID_000, Windows' default "usb\unknown" id. Plus the problem occurs on multiple machines, both WinXP and Win2KPro, including a co-worker's desktop that works fine with his own 7780, so I'm thinking that it's something about my device in particular and not a desktop/driver problem. I've tried every recommended practice I've been able to find, including:
I'm stumped. Anyone else ever seen this problem? I haven't been able to find any details on the 7780's USB interface. Is there some other low-level reset command that might reset the device's PnP id? Peter Halverson BlackBerry 7780 v3.7.1.41 (Platform 1.6.1.41) ------------ from c:\windows\setupapi.log: Code:
#-019 Searching for hardware ID(s): usb\unknown |
I tried everything as well.....and just gave up after my post was not replied in regards to the exact issue you have. DTM worked for my 7510 until I upgraded to a 7520 two months later......which worked for about two weeks.
When you launch DTM, check the 'COnnections Manager' and see if you can manually detect your BB. it worked for me but DTM itself would not detect my device. |
halversp - would type of desktop/laptop do you have?
|
It's the device. I have replaced 3 - 7780 within a year with the same problem. It's the connection between the craddle and or sync cable depending on which one you are using. While talking to Rogers in Canada they mentioned quite a few problems with 7780 and the connector pings breaking in the unit.
|
I had this happen with two of my 7750's. For me, I right clicked the "unknown usb device" in Device Manager and then clicked "Update driver" I pointed it to C:\Program Files\Common Files\Reasearch in Motion\ or C:\Windows\system32\drivers\rimusb.sys and my devices were re-recognized.
|
I hope I get this within the right "thread". I have a question about how to add your own picture files to the blackberry 7100t as the wallpaper. Help, pls. :-)
|
All times are GMT -5. The time now is 08:54 PM. |
Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.