Im having a problem with my lowly old 7100t, i connect it and it doesnt seam to run bcharge automatically (during boot it says the UDEV rule is invalid and iv tried both forms within the rule file to no avail. but im using ubuntu 7.04 feisty fawn so i can expect a few strangnesses). But when i run bcharge manually as root it says its changed the charge state and looking in lsusb -v it says its at 500mA but the charge icon on my Bb vanishes after a second or so of connection regardless. The only way i can get any form of charge process is by leaving barrybackup open/connected, even then tho its only a slow charge. Any ideas?
Heres what lsusb gives:
Code:
Bus 001 Device 003: ID 0fca:0001 Research In Motion, Ltd. Blackberry Handheld
Device Descriptor:
bLength 18
bDescriptorType 1
bcdUSB 1.10
bDeviceClass 255 Vendor Specific Class
bDeviceSubClass 255 Vendor Specific Subclass
bDeviceProtocol 255 Vendor Specific Protocol
bMaxPacketSize0 64
idVendor 0x0fca Research In Motion, Ltd.
idProduct 0x0001 Blackberry Handheld
bcdDevice 1.04
iManufacturer 1 Research In Motion
iProduct 2 Terminal mobile RIM
iSerial 0
bNumConfigurations 1
Configuration Descriptor:
bLength 9
bDescriptorType 2
wTotalLength 46
bNumInterfaces 1
bConfigurationValue 1
iConfiguration 0
bmAttributes 0x80
(Bus Powered)
MaxPower 500mA
Interface Descriptor:
bLength 9
bDescriptorType 4
bInterfaceNumber 0
bAlternateSetting 0
bNumEndpoints 4
bInterfaceClass 255 Vendor Specific Class
bInterfaceSubClass 255 Vendor Specific Subclass
bInterfaceProtocol 255 Vendor Specific Protocol
iInterface 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x81 EP 1 IN
bmAttributes 2
Transfer Type Bulk
Synch Type None
Usage Type Data
wMaxPacketSize 0x0040 1x 64 bytes
bInterval 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x02 EP 2 OUT
bmAttributes 2
Transfer Type Bulk
Synch Type None
Usage Type Data
wMaxPacketSize 0x0040 1x 64 bytes
bInterval 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x83 EP 3 IN
bmAttributes 2
Transfer Type Bulk
Synch Type None
Usage Type Data
wMaxPacketSize 0x0040 1x 64 bytes
bInterval 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x04 EP 4 OUT
bmAttributes 2
Transfer Type Bulk
Synch Type None
Usage Type Data
wMaxPacketSize 0x0040 1x 64 bytes
bInterval 0
Device Status: 0x0000
(Bus Powered)
then this is what it gives when connected to by barry backup:
EDIT: removed as its identical...