Option 6 will list all the command-line switches for JavaLoader. Same results as doing JavaLoader /?.
Code:
Usage: JavaLoader [-u] [-p<port>|<pin>] [-b<baud>] [-d0|-d1] [-w<password>] [-q] <command>
-u Connect to USB handheld (default is serial)
-p<port> Specifies the serial port (serial handhelds only)
-p<pin> Specifies the handheld PIN (USB handhelds only)
-b<baud> Specifies the baud rate (serial handhelds only)
-d0 Disables VM debug mode
-d1 Enables VM debug mode
-w<password> Connects using the specified password
-q Quiet mode
<command> is of
dir [-d] [-s]
Lists modules on the handheld
-d Display dependency information
-s Display siblings
deviceinfo
Provides information on the handheld
load <.cod file> ...
Loads modules onto the handheld
save <module> ...
Retrieves modules from the handheld
info [-d] <.cod file> ...
Provides information on the specified modules
-d Display dependency information
wipe [-a|-f]
Wipes the handheld
-a Wipe applications only
-f Wipe filesystem only
erase [-f] <module> ...
Erases modules on the handheld
-f Force erase of in-use modules
debugmode
Enables VM debug mode
eventlog
Retrives the handheld event log
settime
Sets the time on the handheld to the current time
radio on|off
Turns the handheld's radio on or off
enum
Enumerates all USB handhelds
siblinginfo <.cod file> ...
Provides sibling information on the specified modules
screenshot <.bmp file>
Retrives the current screen contents and saves it as a BMP file