I recently had to replace my Storm due to dust under the screen. My original was Canadian and my new one is Mexican! I am actually having great luck with the replacement Storm other than the bottom of the screen. With my original device, I did the Torx screw adjustment for the screen and it worked perfectly. I used the biz card trick and the tape trick and the felt pad trick yada, yada, yada... however the Torx screw adjustment was perfect!
On the new device, the bottom of the screen clicks much differently than the top. The bottom is much more firm and harder to press than that top. I proceeded to try all the tricks of the trade with little to no results. I could get the top part of the screen to click perfectly via the Torx screw method, however, nothing I try works for the bottom part of the screen. I spent a couple hours doing Torx adjustments, documenting every move I made as to not lose track of positioning, yet I could not get the bottom part dialed in.
Has anyone else had this issue with only the bottom part of the screen? And, if so, did anything you did work to fix it? The device is functional, I just want the feel and click to be uniform across the entire screen. Let me know your thoughts and if you can point me in the right direction. I do not want to return this one if I do not have to. It feels like Russian Roulette every time one of these devices gets swapped out.
Thanks in advance....