For DSE702AS Genset Generator Parts Electronic Auto Start Controller For Sale
When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
For DSE702AS Genset Generator Parts Electronic Auto Start Controller:
$25.39
Feature：
DC Supply: 8 Volts to 35 Volts DC continuous
CranKing Drotoups: able to survive 0 Volts for 50 mS, providing supply was at least 10V before dropout and supply recovers to 5 Volts. This is achieved without the need for internal batteries.
Max. current: operating 50mA standby 10mA Alternator input range: 15 Volts to 227 Volts AC
Alternator input Frequency: 50-60Hz at rated engine speed
start output: 1.2Amp DC at supply voltage
fuel output: 1.2Amp DC at supply voltage
preheat output: 1.2Amp DC at supply voltage
dimensions: 84mm × 72mm × 34.98mm
Operating Temperature range: -30°C to + 70°C
Applicable standards:
compliant with BS EN 60950 low voltage directive
compliant with BS EN 50081-2: 1992 EMC directive
compliant with BS EN 61000-6-4: 2000 EMC quality, good operation
Package List:
1 × 702K-AS Auto Start Generator Controller Board Panel
1 × product check your old picture or model when you order it.
If you are uncertain about the item,please feel free to contact us for confirm.
Sorry for any inconvenience caused.
Full refund guarantee if does not fit.
Thank you for your understanding
Item SpecificsBrand findmallMPN IN600912ALType Automatic Voltage RegulatorQuantity 1 PCSpecification yesBundle Description NoModified Item NoEquipment Type DSE702K-AS DSE702ASModel 702K-ASCustom Bundle NoWarranty 1 YearFeature ESCPFeature ESCP
Introduction of Promotion
Fold over fold
Payment Shippinghandling time: 1~3day
ReturnsRefund is valid within 30 days after thepayment date
Item must be returned in original packing same as reached
Contact Us If you are satisfied with the product you received,please leave us positive response and 5 scores .Please give us the opportunity to resolve any problem. We understand the concerns and frustrations you might have, and will try our best to resolve the issues.We care about our valued customers, and will always try to help you. So if you have any problems, please e-mail us immediately. CNCHand ToolsMetalworking SuppliesGenerator AccessoriesIndustrial Control Module For DSE702AS Genset Generator Parts Electronic Auto Start ControllerFeature：
DC Supply: 8 Volts to 35 Volts DC continuous
CranKing Drotoups: able to survive 0 Volts for 50 mS, providing supply was at least 10V before dropout and supply recovers to 5 Volts. This is achieved without the need for internal batteries.
Max. current: operating 50mA standby 10mA Alternator input range: 15 Volts to 227 Volts AC
Alternator input Frequency: 50-60Hz at rated engine speed
start output: 1.2Amp DC at supply voltage
fuel output: 1.2Amp DC at supply voltage
preheat output: 1.2Amp DC at supply voltage
dimensions: 84mm × 72mm × 34.98mm
Operating Temperature range: -30°C to + 70°C
Applicable standards:
compliant with BS EN 60950 low voltage directive
compliant with BS EN 50081-2: 1992 EMC directive
compliant with BS EN 61000-6-4: 2000 EMC quality, good operation
Package List:
1 × 702K-AS Auto Start Generator Controller Board Panel
1 × product check your old picture or model when you order it.
If you are uncertain about the item,please feel free to contact us for confirm.
Sorry for any inconvenience caused.
Full refund guarantee if does not fit.
Thank you for your understanding
Introduction of Promotion
Fold over fold
Payment Shippinghandling time: 1~3day
ReturnsRefund is valid within 30 days after thepayment date
Item must be returned in original packing same as reached
Contact Us If you are satisfied with the product you received,please leave us positive response and 5 scores .Please give us the opportunity to resolve any problem. We understand the concerns and frustrations you might have, and will try our best to resolve the issues.We care about our valued customers, and will always try to help you. So if you have any problems, please e-mail us immediately.All rights reserved.
Hot Item ER11/ER16/ER20/ER25/ER32/ER40 Spring Collet Set For CNC Milling Lathe Machine USD 11.72 3 HP 3450RPM Electric Motor Compressor Duty 56 Frame 1Phase 115-230V New USD 113.91 6 Pack E7018 1/8 Inch 10-lbs Premium Arc Welding Rods Carbon Steel Electrode Rod USD 104.75 100Pack 4-1/2"×7/8'' 40 Grit T29 Premium Zirconia Flap Disc Sanding Grinding US USD 53.51 HARDENED 1/8" STEEL PARALLEL SET 10 MATCHED PAIRS PARALLELS .0002" USD 38.48 New List Item 2 Pack CAT50-ER32 COLLET CHUCK 4" 100mm Gage Length Tool Holder Set 0.0001" New USD 92.35 2HP General Electric Motor 3450 RPM 56C Frame 230V 60HZ 5/8"Shaft 1 Phase USD 191.99 Brown & Sharpe #9 ER32 Collet Chuck Tool Holder US USD 46.99 4" Cross Drill Press Vise X-Y Clamp Heavy Machine Slide Metal Milling 2 Way New USD 41.69 5HP 3 Phase Electric Motor 1800 RPM 184T Frame TEFC 230/460V Severe Duty USD 442.99
Related Items:
For DSE702AS Genset Generator Parts Electronic Auto Start Controller
$26.07
Auto Start Generator Controller Board Panel DSE702K-AS DSE702AS For Generator US
$24.71
Auto Start Generator Controller Board Panel DSE702K-AS DSE702AS For Generator
$26.70
