When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
Description:
Power Source: ac
Input Voltage: 220 Volts
Applicable motor horse-power: ≤1.5kw (2hp)
Input valtage: 220VAC(+/-5%) 1 or 3 phase("R", "T" terminals for 1 phase, "R", "S". "T" terminals for 3 phase)
Output valtage: 3 phase 220v
Input Frequency: 47-63Hz
Output frequency: 0-400Hz, 0-50Hz/60Hz
Rated current: 6.8A (Represents the maximum current the VFD can withstand,this is a fixed value)
Connection way: Input: 220VAC(+/-5%) 1 or 3phase(for 1-phase input, just connect the input wire to the R and S terminals). Output: 3phase 220v. Frequency: 0-50hz/60hz. 0-400hz.
Multiplex terminal: Unlike other inexpensive VFDS, this VFD has two sets of terminal functions, Rich of digital and analogy control terminals for versitile control, optional MODBUS (RS485) extension, diversified parameter setting.
Safety performance: Take advantage of various protection ways such as Motor short-circuit detection at power-on, output phase loss protection, over-current protection, over-voltage protection, under-voltage protection, overheat protection, overload protection and etc.
Good Noise Control: The product has the advantages of low noise and low electromagnetic interference, which are achieved by the excellent PMW control technology and component compatibility design. There is enough space for cooling between each component, and the product casing is designed with multiple holes, the above features can make this VFD have a longer service life.
Note: Products with electrical plugs are designed for use in the US. Outlets and voltage differ internationally and this product may require an adapter or converter for use in your destination. Please check compatibility before purchasing. VFD output terminal can only be connected to the motor, it cannot be directly connected to the switch
IMPORTANT NOTE: This product does not support the installation of brake resistance (this function needs to be customized). If your motor is heavy load, pls choose a higher horsepower vfd than your motor's. To protect the VFD, be sure to press the red button "Stop" and turn off the power when you stop using it.
Function introduction: DC cooling fan: DC cooling fan low noise, large air volume help vfd heat dissipation, improve product stability
Basic parameter for 400hz spindle: For 400hz motor - Set pd005=400, pd004=400,pd003=400, pd072=400, pd144=3000, Then you can start driving the 400hz spindle. (Note: The VFD is already set to 400Hz by default when it is received)
Basic parameter for 3 phase 50/60Hz motor: Drive 50/60hz motor - Set pd005=50/60, pd004=50/60, pd003=50/60, pd072=50/60
Key Function: UP - Progressively increase data or function codes. DOWN - Progressively decrease data or function codes. SET - Enter menus step-by-step, save setting parameters. PRGM - Exit current(or present) state, switch among each states, mainly used to switch monitoring state, exit to previous menu. FWD/REV - 1, Press momentary button to start,release to stop; 2 Switch the rotation direction. SHIFT - Switch monitoring parameters at monitoring state, at secondary menu, move data box to process editing position. Kindly Note - If you want to show RPM in the display,please press 'SHIFT' key.
Diverse terminals, more functions for you to choose: Supports external potentiometer control (connect the "FOR" and "DCM" terminals,than set PD001=1). Supports mcah3 function and RS-485 communication.
Advanced motherboard features: PID control - advanced calculus PID closed-loop arithmetic, quick responding speed and high suitability. Easy PLC function can realize 16 legs of speed and inverter control function. RS485 communication port, adopting standard international MODBUS main circuit control. With extremely strong anti-jamming capability. Low output ratting torque0.5HZ-150%, low speed running ability. Carrier adjustable by 16KHZ, completely soundless working environment. Broad voltage working area, normal running in 304V-456V. Auto voltage regulation (AVR) technique, for ensuring the inverter load capability. With perfect error protection and short circuit starting protection capability.
Package Includes:
1 × Variable Frequency Drive
About LABLT:
LABLT has rich experience in the production, sales and after-sales service of Industrial parts. For many years, we have been committed to providing professional and personalized services to enhance the shopping experience of buyers. If you need any parts, please come to LABLT to buy them. We look forward to cooperating with you!
We accept payment via Paypal,Google Pay,VISA,Master Card,American Express,Discover, Mastercard payment.
SHIPPING & DELIVERYPickup is not available as all items are shipped to buyers - NO EXCEPTIONS
Orders are posted by USPS or Fedex
The most Products has months warranty .
The warranty does NOT cover damage of faulty Goods caused by: an accident or crash, damage caused in transit, damage cause by unauthorised repairs, improper installation of the Goods.
If you have purchased the wrong Good or are returning a Good as a warranty claim, we will accept a return of that good and issue refund or send out a replacement Good subject to the following:
you must contact us first about the Goods before returning the Goods to us, and if we agree to accept a return of the incorrectly purchased Good or if we agree to accept the warranty claim over the Good then you MUST do the following:
the Goods must be securely and appropriately packed so they are not damaged during transit;
the Goods must be returned in their original packaging;
the Goods must be like new and not show any signs of use or having been installed or fitted;
the claim for refund must be advised to us no later than 30 days after the date you bought the Good.
Description:
Power Source: ac
Input Voltage: 220 Volts
Applicable motor horse-power: ≤1.5kw (2hp)
Input valtage: 220VAC(+/-5%) 1 or 3 phase("R", "T" terminals for 1 phase, "R", "S". "T" terminals for 3 phase)
Output valtage: 3 phase 220v
Input Frequency: 47-63Hz
Output frequency: 0-400Hz, 0-50Hz/60Hz
Rated current: 6.8A (Represents the maximum current the VFD can withstand,this is a fixed value)
Connection way: Input: 220VAC(+/-5%) 1 or 3phase(for 1-phase input, just connect the input wire to the R and S terminals). Output: 3phase 220v. Frequency: 0-50hz/60hz. 0-400hz.
Multiplex terminal: Unlike other inexpensive VFDS, this VFD has two sets of terminal functions, Rich of digital and analogy control terminals for versitile control, optional MODBUS (RS485) extension, diversified parameter setting.
Safety performance: Take advantage of various protection ways such as Motor short-circuit detection at power-on, output phase loss protection, over-current protection, over-voltage protection, under-voltage protection, overheat protection, overload protection and etc.
Good Noise Control: The product has the advantages of low noise and low electromagnetic interference, which are achieved by the excellent PMW control technology and component compatibility design. There is enough space for cooling between each component, and the product casing is designed with multiple holes, the above features can make this VFD have a longer service life.
Note: Products with electrical plugs are designed for use in the US. Outlets and voltage differ internationally and this product may require an adapter or converter for use in your destination. Please check compatibility before purchasing. VFD output terminal can only be connected to the motor, it cannot be directly connected to the switch
IMPORTANT NOTE: This product does not support the installation of brake resistance (this function needs to be customized). If your motor is heavy load, pls choose a higher horsepower vfd than your motor's. To protect the VFD, be sure to press the red button "Stop" and turn off the power when you stop using it.
Function introduction: DC cooling fan: DC cooling fan low noise, large air volume help vfd heat dissipation, improve product stability
Basic parameter for 400hz spindle: For 400hz motor - Set pd005=400, pd004=400,pd003=400, pd072=400, pd144=3000, Then you can start driving the 400hz spindle. (Note: The VFD is already set to 400Hz by default when it is received)
Basic parameter for 3 phase 50/60Hz motor: Drive 50/60hz motor - Set pd005=50/60, pd004=50/60, pd003=50/60, pd072=50/60
Key Function: UP - Progressively increase data or function codes. DOWN - Progressively decrease data or function codes. SET - Enter menus step-by-step, save setting parameters. PRGM - Exit current(or present) state, switch among each states, mainly used to switch monitoring state, exit to previous menu. FWD/REV - 1, Press momentary button to start,release to stop; 2 Switch the rotation direction. SHIFT - Switch monitoring parameters at monitoring state, at secondary menu, move data box to process editing position. Kindly Note - If you want to show RPM in the display,please press 'SHIFT' key.
Diverse terminals, more functions for you to choose: Supports external potentiometer control (connect the "FOR" and "DCM" terminals,than set PD001=1). Supports mcah3 function and RS-485 communication.
Advanced motherboard features: PID control - advanced calculus PID closed-loop arithmetic, quick responding speed and high suitability. Easy PLC function can realize 16 legs of speed and inverter control function. RS485 communication port, adopting standard international MODBUS main circuit control. With extremely strong anti-jamming capability. Low output ratting torque0.5HZ-150%, low speed running ability. Carrier adjustable by 16KHZ, completely soundless working environment. Broad voltage working area, normal running in 304V-456V. Auto voltage regulation (AVR) technique, for ensuring the inverter load capability. With perfect error protection and short circuit starting protection capability.
Package Includes:
1 × Variable Frequency Drive
About LABLT:
LABLT has rich experience in the production, sales and after-sales service of Industrial parts. For many years, we have been committed to providing professional and personalized services to enhance the shopping experience of buyers. If you need any parts, please come to LABLT to buy them. We look forward to cooperating with you!
We accept payment via Paypal,Google Pay,VISA,Master Card,American Express,Discover, Mastercard payment.
Pickup is not available as all items are shipped to buyers - NO EXCEPTIONS
Orders are posted by USPS or Fedex
The most Products has months warranty .
The warranty does NOT cover damage of faulty Goods caused by: an accident or crash, damage caused in transit, damage cause by unauthorised repairs, improper installation of the Goods.
If you have purchased the wrong Good or are returning a Good as a warranty claim, we will accept a return of that good and issue refund or send out a replacement Good subject to the following:
you must contact us first about the Goods before returning the Goods to us, and if we agree to accept a return of the incorrectly purchased Good or if we agree to accept the warranty claim over the Good then you MUST do the following:
the Goods must be securely and appropriately packed so they are not damaged during transit;
the Goods must be returned in their original packaging;
the Goods must be like new and not show any signs of use or having been installed or fitted;
the claim for refund must be advised to us no later than 30 days after the date you bought the Good.
All rights reserved.
LABLT VFD 1 to 3 Phase Variable Frequency Drive 1.5kW 2HP 220V Input AC 7A
$80.54
LABLT 2.2 KW VFD 220 V 3 HP 1 to 3 Phase Variable Frequency Drive Inverter
$88.88
LABLT 7.5KW 10HP 220V 1 To 3 Phase Variable Frequency Drive Inverter VFD
$164.78