Withstand Hi-Pot Tester with Klgital Display and Remote Control 220V AC/DC 10KV For Sale
When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
Withstand Hi-Pot Tester with Klgital Display and Remote Control 220V AC/DC 10KV:
$472.35
Withstand Hi-Pot 10KV 100VA Tester
RK267 series voltage withstand test instruments are for general- purpose HV test operation, It can be widely used for voltage withstand test in electrician’s assistant instrument,rubber-wooden facility,voltage convertor,wires,power meter,motor, power supply plug, cables and all kinds ofelectronic and electric products. As the launch of the national security standard, Voltage withstand instrument has become one of necessary withstand testinstruments to the radio and electronic products manufacturer.
Operating request: Environmental temperature 0~40℃
Relative dumidity≤75%
Paraments Model RK2671AM Description Klgital display with remote control Test Voltage (AC) 0~10KV +/-5% Test Voltage (DC) 0~10KV +/-5% Leakage Current (AC) 0~2/20mA +/-5% Leakage Current (DC) 0~2/10mA +/-5% Timing (s) 0~99s; Manual control Pmax 100VA Intput Voltage(Power) 220V Weight 40lbs
Pre-used Caution
Read the following items carefully before operating RK267 series voltage withstand test instrument.
1. Use three-hole power supply plug and insure GND connection well.
2. GND port and power supply GND port should be connected well.
3. Wear insulation glove, stand on insulation mat.
4. Anti-clockwisely circumvolve“V-ADJ” rotary switch to the maximum before turn on test instrument.
5. Before preset all functions, reset instrument.
6. Don’t connect test port and test wire when doing test.
7. Don’t connect HV output port with shield box or GND wire to avoid instrument damage.
8. Turn off power when accident take place.
9. Examine and repair when Indicator or annunciator is out of function.
10. Operate carefully to avoid hazard when take the remote test.
11.The instrument must be placed on the worktable of conductive materials.
12.The operator can not wear clothes with metal decoration or wear metal accessories.
13.When the tester is in the test conditions, the test line, the test probes, output end , and thetest objectsare all with high pressure, do not touch!
1×Withstand voltage test equipment
1×High voltage test bar
1×Remote control test bar
1×Ground wire
1×power cord
Related Items:
Tester Withstand Hi-Pot Tester 5KV AC 110V Voltage Tester RK2670AM 100VA 0~99s
$205.80
Withstand Hi-Pot Tester with Klgital Display and Remote Control 220V AC/DC 10KV
$472.35
Tester Withstand Hi-Pot Tester 5KV AC 110V Voltage Tester 100VA 0~99s
$205.80
