[snabald]

I found the the reason my GPS has not been working is that PDE server IP got wiped out by mapquest navigator. I finally got Sprint to give me my MSL code, and now I have searched all over the internet for the proper PDE settings to use on the gpsOne tab in QPST but nothing seems to work, what I need is:

PDE IP Address

PDE Port Number

PDE Transport setting (IP or DBM)

Position Calculation (PDE or Mobile)

Again, this is on a Sprint 8703e

EDIT

Initially in QSPT the settings were:

PDE IP Address: 0.0.19.47

PDE Port Number: 4911

PDE Transport: DBM

Position Calculation: Blank

I'm 99% Sure this isn't right.

[snabald]

UPDATE

I called Sprint customer service and asked themand they had no idea what I was talking about, this is so frustrating.

*SIGH*

[RemyJ]

Did you try a *228 to reprogram?

[snabald]

Originally Posted by RemyJ

Did you try a *228 to reprogram?

Tried that, *228 takes me to tech support. The problem is actually with the qualcomm chip set, the PDE settings are wrong, I even went as far as wiping my phone and reloading everything.

After much research I've found the only fix is the change the PDE setting with QPST, only I don't know what the settings should be and sprint has no idea what I'm talking about.

[snabald]

UPDATE:

I fially talked to someone at sprint that knew what I was talking about, he gave me some setttings to try and still now luck, I still can't get a GPS lock.

I have no idea what is causing this.

[lopernot]

I'd love to help you find the setting, but QPST is giving me an error when I try to connect to my 8703e with the Service Programming part of it. It connects fine with the other parts of QPST. I'm using version 2.7 build 264

[Chernobyl]

Originally Posted by snabald

I found the the reason my GPS has not been working is that PDE server IP got wiped out by mapquest navigator. I finally got Sprint to give me my MSL code, and now I have searched all over the internet for the proper PDE settings to use on the gpsOne tab in QPST but nothing seems to work, what I need is:

PDE IP Address

PDE Port Number

PDE Transport setting (IP or DBM)

Position Calculation (PDE or Mobile)

Again, this is on a Sprint 8703e

EDIT

Initially in QSPT the settings were:

PDE IP Address: 0.0.19.47

PDE Port Number: 4911

PDE Transport: DBM

Position Calculation: Blank

I'm 99% Sure this isn't right.

Try: 68.28.31.49 for the PDE IP and 5017 for the PDE port. Transport should be "IP" and "PDE" for position calculation.

No guarantees, but it might work.